Pinguino32 uses a MRF24J40MA radio module to communicate with another Pinguino32 !!
This shield uses the UEXT connector of PIC32-PINGUINO and PIC32-PINGUINO-OTG. A very simple library is used to communicate with the module. You need only to initialise the module in the setup()
then to send data, you must use the ZIG.send instruction as described below:
each module must be configured with:
– radio channel ( between 11 and 26 )
– PAN ID ( personnal area network identification between 0 and 65535 )
– address ( between 0 and 65535 ).
to receive data from another module, you must use this instruction:
A simple example has been added to the example folder of revision 147 of Pinguino32X.