Pinguino32-DIY is now fully functional. The board is working with its own HID boot loader.
We have now some work to do to incorporate this board in the Pinguino IDE. The job should be done this week and we should propose a new version of the IDE next week-end !!
At this moment,’GENERIC250F128′ works with a 8 Mhz crystal for a finally system frequency of 40 Mhz. The goal is to make it work with the internal oscillator.

All the files can be downloaded on the google code area of the project. Design has been made with KICAD. The compressed file contain:
- KICAD design to build the board
- HID bootloader to be burned to the chip
- a simple application program to be used to test upload with ubw32

This design is published as GPL and you are free to build it, modify it and of course improve it. It is pin to pin compatible with the PIC32MX220F032B wich can be used with the same bootloader.
We are proud to propose this board as ( probably ) the first 32 bits home-made system.
With this board, Pinguino IDE keep is DIY spirit !!

The Development Team……

PinguinoX.3 is now available in the download area for both Linux and Windows computer.
With the help of all the users and the developers team, many improvement have been added to make Pinguino a better development environment.
Still in Beta, as usual, but to be improved with your remarks, critics, suggestions…..
Many thanks to the users,
Congratulations to the development team:

• Regis Blanchot
• Marcus Fazzi
• Jesus Carmona Esteban
• Alfred Broda
• Yeison Cardona
• Henk Van Beek
• Björn Pfeiffer
• Alexis Sanchez

Download revision 381 on website.